High friction moments in large hard‐on‐hard hip replacement bearings in conditions of poor lubrication
Explore this paper's citation graph
Summary
Although large diameter ceramic bearings demonstrate an improvement in friction characteristics in the lubricated condition, they could potentially replicate problems currently experienced due to high friction moments in metal bearings once lubrication is compromised.
- Type
- article
- Published
- 2013-05-01
- Cited by
- 90
- References
- 29
- Access
- Open access
- OpenAlex
- https://openalex.org/W1964229634
- Semantic Scholar
- https://api.semanticscholar.org/CorpusID:25388747
Keywords
Lubrication, Bearing (navigation), Materials science, Ceramic, Tribology
References
- Low Friction Arthroplasty of the Hip
- Total hip arthroplasty with ceramic-on-ceramic bearing failure from third-body wear.
- In vitro investigation of friction under edge‐loading conditions for ceramic‐on‐ceramic total hip prosthesis
- The 2009 Frank Stinchfield Award: “Hip Squeaking”: A Biomechanical Study of Ceramic-on-ceramic Bearing Surfaces
- Friction in hip-joint prostheses and its influence on the fixation of the artificial head
- Ceramic-on-Ceramic Bearings in Total Hip Arthroplasty
- Friction of total hip replacements with different bearings and loading conditions.
- Effect of swing phase load on metal-on-metal hip lubrication, friction and wear.
- Cementing techniques for hip resurfacing arthroplasty: development of a laboratory model.
- The influence of component design, bearing clearance and axial load on the squeaking characteristics of ceramic hip articulations.
- Comparison of whole-blood metal ion levels in four types of metal-on-metal large-diameter femoral head total hip arthroplasty: the potential influence of the adapter sleeve.
- Spectral characterization of squeaking in ceramic‐on‐ceramic total hip arthroplasty: Comparison of in vitro and in vivo values
- Graphitic Tribological Layers in Metal-on-Metal Hip Replacements
- Tribological principles in metal-on-metal hip joint design
- High Cup Angle and Microseparation Increase the Wear of Hip Surface Replacements
- Friction moments of large metal-on-metal hip joint bearings and other modern designs.
- Failure rates of stemmed metal-on-metal hip replacements: analysis of data from the National Joint Registry of England and Wales.
- Biomechanics of short hip endoprostheses--the risk of bone failure increases with decreasing implant size.
- Taper junction failure in large-diameter metal-on-metal bearings
- Hip contact forces and gait patterns from routine activities.
Cited by
- Does the surface finish, the taper angle difference and the assembly force effect the taper strength between stem and ball head of a modular hip implant?
- CORR Insights®: Otto Aufranc Award: Large Heads Do Not Increase Damage at the Head-neck Taper of Metal-on-polyethylene Total Hip Arthroplasties
- Wear patterns of taper connections in retrieved large diameter metal‐on‐metal bearings
- The lubrication performance of the ceramic-on-ceramic hip implant under starved conditions
- The rise and fall of large bore metal-on-metal hip prostheses
- The influence of stem design on critical squeaking friction with ceramic bearings
- Quantification of the Contact Area at the Head-Stem Taper Interface of Modular Hip Prostheses
- The Taper Disaster - How Could it Happen?
- Otto Aufranc Award: Large Heads Do Not Increase Damage at the Head-neck Taper of Metal-on-polyethylene Total Hip Arthroplasties
- A review of squeaking in ceramic total hip prostheses
- Taper Design Affects Failure of Large-head Metal-on-metal Total Hip Replacements
- The reliability of a scoring system for corrosion and fretting, and its relationship to material loss of tapered, modular junctions of retrieved hip implants.
- Response to the letter by B. Masson.
- Assessing the material loss of the modular taper interface in retrieved metal-on-metal hip replacements
- Polyaxial locking and compression screws improve construct stiffness of acetabular cup fixation: a biomechanical study.
- Femoral head diameter considerations for primary total hip arthroplasty.
- Hard-on-Hard Lubrication in the Artificial Hip under Dynamic Loading Conditions
- A novel analytical approach for determining the frictional moments and torques acting on modular femoral components in total hip replacements.
- Low torque levels can initiate a removal of the passivation layer and cause fretting in modular hip stems.
- Friction in Total Hip Joint Prosthesis Measured In Vivo during Walking
Related papers
- Study of Tribology on Surface Topography of Sliding Bearing
- Early Detection of Lubrication Anomalies in Oil-Lubricated Bearings
- Lubrication of rolling bearing pairs in environmental aspect
- Tribochemistry in ceramic lubrication
- Application of Split Self-lubrication Bearing
- Lubrication States and Wear Analysis of Hydrodynamic Bearing
- The Theoretical Caculation on Minmimum Water Film of Water Lubrication Ceramie Bearing
- Some Aspects of BEARING LUBRICATION