Effects of Stress Amplitude Ratio and Phase Angle on Short Fatigue Crack Behavior and Fracture Mode of EA4T Steel
Explore this paper's citation graph
- Type
- article
- Published
- 2021-03-15
- Cited by
- 4
- References
- 31
- OpenAlex
- https://openalex.org/W3138984881
- Semantic Scholar
- https://api.semanticscholar.org/CorpusID:232237192
Keywords
Materials science, Fracture (geology), Cyclic stress, Composite material, Microstructure
References
- Some observations on short fatigue cracks under biaxial fatigue
- Interaction and evolution of short fatigue cracks
- About the role of residual stresses and surface work hardening on fatigue ΔKth of a nitrided and shot peened low-alloy steel
- THE BEHAVIOUR OF SHORT FATIGUE CRACKS AND THEIR INITIATION PART I—A REVIEW OF TWO RECENT BOOKS
- Tension–torsion high-cycle fatigue failure analysis of 2A12-T4 aluminum alloy with different stress ratios
- Mixed mode fracture of an HSLA-100 steel
- SHORT FATIGUE CRACK BEHAVIOUR AND ANALYTICAL MODELS: A REVIEW
- Influence of stress ratio on fatigue crack growth in mild steel
- Quantifying microstructurally small fatigue crack growth in an aluminum alloy using a silicon-rubber replica method
- High cycle fatigue and fracture mode analysis of 2A12–T4 aluminum alloy under out-of-phase axial–torsion constant amplitude loading
- Observation and modeling of physically short fatigue crack closure in terms of in-situ SEM fatigue test
- THE BEHAVIOUR OF SHORT FATIGUE CRACKS AND THEIR INITIATION PART II‐A GENERAL SUMMARY
- Fatigue limit of induction hardened railway axles
- Study on New Process of Elimination of Banded Structure and Grain Refinement for EA4T Steel
- Equation of Short Fatigue Crack Growth Law of 1Cr18Ni9Ti Weld Metal
- Influence of variable stress ratio during train operation on residual fatigue lifetime of railway axles
- Short cracks growth in low cycle fatigue under multiaxial in-phase loading
- Comparison of fatigue crack growth stress ratio effects under simple variable amplitude loading using fractographic and strain measurements
- Probabilistic fatigue assessment for high-speed railway axles due to foreign object damages
- Experimental investigation of small fatigue crack growth due to foreign object damage in titanium alloy TC4
Cited by
- Influence of laser power on the microstructure and properties of Fe314 alloy cladding layer on EA4T steel
- Constitutive Model and Fracture Criterion of Q345 Steel Welded Joints
- Steels for rail axles - an overview
- Modelling of Mechanical Response and Microstructure Evolution of EA4T Steel during Hot Compression Using the Improved Crystal Plasticity Finite Element Method
Related papers
- Studies on the Fatigue Crack Initiation and Propagation : Report 1,Effects of Crack Length, Stress Range and Minimum Stress on Fatigue Crack Propagation
- RESEARCH OF THE FATIGUE CRACK PROPAGATION CHARACTERISTIC ON RAILWAY HOLLOW AXLES
- Scanning Electron Microscope of Fatigue and Creep-Fatigue From Stress Concentrations in Plates
- Fatigue Crack Growth Behaviour and Role of Roughness-Induced Crack Closure in CP Ti: Stress Amplitude Dependence
- Crack‐tip Degradation Processes Observed during in situ Cyclic Fatigue of Partially Stabilized Zirconia
- Crack initiation and propagation of 30CrMnSiA steel under uniaxial and multiaxial cyclic loading