Effect of prestress state on surface layer characteristic of S30432 austenitic stainless steel in shot peening process

Keywords

Shot peening, Peening, Materials science, Residual stress, Microstructure

References

• Relaxation of residual stress in shot peened Udimet 720Li under high temperature isothermal fatigueAllan M. Evans, S KIM, Judith Shackleton — 2005
• Elasto-plastic pseudo-dynamic numerical model for the design of shot peening process parametersRajiv Shivpuri, Xiaomin Cheng, Yongning Mao — 2009
• THE EFFECT OF RESIDUAL STRESSES INDUCED BY SHOT‐PEENING ON FATIGUE CRACK PROPAGATION IN TWO HIGH STRENGTH ALUMINIUM ALLOYSYoshiharu MUTOH, G. H. Fair, B. Noble — 1987
• A process model for shot peen formingTianhou Wang, MJ Platts, Andrew Levers — 2006
• Effect of stress peening on surface layer characteristics of (TiB + TiC)/Ti–6Al–4V compositeLechun Xie, Chuanhai Jiang, Weijie Lü — 2012
• XRD investigation of microstructure strengthening mechanism of shot peening on laser hardened 17-4PHZhou Wang, Weizhi Luan, Junjie Huang — 2011
• SURFACE NANOCRYSTALLIZATION INDUCED BY SHOT PEENING AND ITS EFFECT ON CORROSION RESISTANCE OF 1Cr18Ni9Ti STAINLESS STEELTiansheng Wang, Jinku Yu, Bingfeng Dong — 2006
• Engineering the residual stress state and microstructure of stainless steel with mechanical surface treatmentsM. Turski, S. Clitheroe, Alexander Evans — 2010
• Surface Layer Characteristics of TiB2/Al Composite by Stress PeeningWeizhi Luan, Chuanhai Jiang, Vincent Ji — 2009
• Line broadening analysis using integral breadth methods: a critical reviewPaolo Scardi, Matteo Leoni, R. Delhez — 2004
• Effect of Boron on Microstructure and Creep Strength ofAdvanced Ferritic Power Plant SteelsFujio Abe — 2011
• Improvement of spring fatigue strength by new warm stress double shot peening processAkira TANGE, Kazuya Ando — 2002
• Effect of ceramic conversion surface treatment on fatigue properties of Ti6Al4V alloyChang‐Jiu Li, Dean Horspool, Hanshan Dong — 2007
• Stabilization of martensitic microstructure in advanced 9Cr steel during creep at high temperatureFujio Abe, Tatsuo Horiuchi, M. Taneike — 2004
• Shot peening effect on aluminide diffusion coating formation on alloy steels at low temperaturesZ.D. Xiang, P.K. Datta — 2006
• Finite element modelling of shot peening process: Prediction of the compressive residual stresses, the plastic deformations and the surface integrity☆Mounir Frija, Tarek Hassine, Raouf Fathallah — 2006
• Fatigue crack initiation and propagation on shot-peened surfaces in A316 stainless steelE DELOSRIOS, A WALLEY, Marcos Milan — 1995
• Compressive residual stress introduced by shot peeningShengping Wang, Yongjun Li, Yao Mei — 1998
• A rapid method for analysing the breadths of diffraction and spectral lines using the Voigt functionJ. I. Langford — 1978
• Effect of Surface Nano-Crystallization on Microstructure and Mechanic Properties of Commercial Pure TitaniumAi Ling Wen, Rui Ren, Sheng Wu Wang — 2004

Cited by

• Enhancing surface layer properties of an aircraft aluminum alloy by shot peening using response surface methodologyYong-Seog Nam, Yooin Jeong, Byung-Cheol Shin — 2015
• Shot peening effect on 904 L welds corrosion resistanceBarbara Nasiłowska, Zdzisław Bogdanowicz, Michał Wojucki — 2015
• Wpływ kulowania na właściwości użytkowe połączeń spawanych stali austenitycznej 1.4539 wykonanych metodą TIG i wiązką laseraBarbara Nasiłowska, Zdzisław Bogdanowicz, Grzegorz Mońka — 2015
• Effect of the Shot Peening Process on the Corrosion and Oxidation Resistance of AISI430 Stainless SteelJefferson da Silva Peltz, Lílian Vanessa Rossa Beltrami, Sandra Raquel Kunst — 2015
• Effect of Impact Pressure on Reducing the Weld Residual Stress by Water Jet Peening in Repair Weld to 304 Stainless Steel Clad PlateWenchun Jiang, Yun Luo, Huai Wang — 2015
• Micro-structure and surface layer properties of 18CrNiMo7-6 steel after multistep shot peeningPeng Fu, Ke Zhan, Chuanhai Jiang — 2013
• Intergranular corrosion behavior associated with delta-ferrite transformation of Ti-modified Super304H austenitic stainless steelG. R. Bai, Shanping Lu, Dianzhong Li — 2015
• Effects of ultrasonic nanocrystalline surface modification (UNSM) technique on the tribological behavior of sintered Cu-based alloy☆Auezhan Amanov, Young Sik Pyun, Shinya Sasaki — 2014
• Effects of shot peening on fatigue behavior in high speed steel and cast iron with spheroidal vanadium carbides dispersed within martensitic-matrix microstructureYoshihiko UEMATSU, Toshifumi Kakiuchi, K. Tokaji — 2013
• INVESTIGATION OF CYCLIC SOFTENING BEHAVIOR OF SHOT PEENED S30432 AUSTENITIC STAINLESS STEEL BY X-RAY DIFFRACTION METHODKe Zhan, Xue Zheng, Hao Han — 2014
• Surface Modification of 304 Steel Using Triple-Step Shot PeeningPeng Fu, Chuanhai Jiang, Xueyan Wu — 2015
• Effect of Ultrasonic Shot Peening on High Cycle Fatigue Behavior in Type 304 Stainless Steel at Elevated TemperatureToshifumi Kakiuchi, Yoshihiko UEMATSU, Norihiko HASEGAWA — 2016
• Synergetic effect of thicker nanocrystalline structure with high amount of strain induced martensite on surface characteristics of plasma nitrided austenitic stainless steelPrakash G. Ranaware, Manoj Rathod — 2016
• Shot peening in a novel centrifugal air blast reactorPrakash G. Ranaware, Manoj Rathod — 2017
• Effects of Waterjet Treatment on Surface Integrity of Metals and its OptimizationMohd Azhari, Mohd Azmir Mohd Nizah — 2014
• Investigation of fatigue performance improvement in SiCw/Al composites with different modified shot peening treatments by considering surface mechanical propertiesJunjie Huang, Zhou Wang, Jin Gan — 2017
• Controllable hierarchical micro/nano patterns on biomaterial surfaces fabricated by ultrasonic nanocrystalline surface modificationYuan Liang, Haifeng Qin, Nitin Mehra — 2018
• FE analysis of shot-peening-induced residual stresses of AISI 304 stainless steel by considering mesh density and friction coefficientGang Wu, Zhou Wang, Jin Gan — 2019
• The effect of pre-strain on the strength of welded jointIgnatius Henry Adi Nagoro, Joko Yunianto Prihatin, B. R. Hilca — 2018
• Influence of Pre-Stress Magnitude on Fatigue Crack Growth Behavior of Al-AlloyChunguo Zhang, Weizhen Song, Qitao Wang — 2018

Related papers

• Development on surface modification technology of advanced shot peeningHuang Zhi-cha — 2015
• Comparison between the improvements made to the fatigue strength of stainless steel by cavitation peening, water jet peening, shot peening and laser peeningHitoshi SOYAMA — 2019
• Strengthening of Aerial Aluminum Alloy with Laser Shock PeeningLei Zhou — 2007
• Contrast Study of Fatigue Behavior Improvement on Stainless Steel in Laser Shock Peening and Shot PeeningWei Li — 2010
• Effect of controlled shot peening and laser shock peening on the fatigue performance of 2024-T351 aluminum alloyC. A. Rodopoulos, José Solis Romero, Sean A. Curtis — 2003
• Effects of Shot Peening and Cavitation Peening on Properties of Surface Layer of Metallic Materials—A Short ReviewAleksander Świetlicki, Mirosław Szala, Mariusz Walczak — 2022
• The Effects of Laser Peening and Shot Peening on High Cycle Fatigue in 7050-T7451 Aluminum AlloyHarold Luong, Michael R. Hill — 2010
• The Effect of Shot Peening on the Fatigue Strength of Carburizing Steels.Atsumi Hatano, Kunio Namiki — 1992