Hall–Petch relation and boundary strengthening

Keywords

Grain boundary strengthening, Materials science, Grain boundary, Dislocation, Crystallite

References

• Yield, flow and fracture of polycrystalsT. N. Baker — 1983
• Mechanical behavior of nanocrystalline metals and alloysK.S. Kumar, H. Van Swygenhoven, S. Suresh — 2003
• The Strain and Grain Size Dependence of the Flow Stress of CopperN. Hansen, B. Ralph — 1982
• Tensile behavior and fracture in nickel and carbon doped nanocrystalline nickelChenghe Xiao, Reza A. Mirshams, S.H. Whang — 2001
• Quantitative Analysis of Structure-Strength Relation of Commercial Purity Aluminium Deformed by Accumulative Roll Bonding and Annealed at Low TemperatureRintaro Ueji, Xiaoxu Huang, Niels Hansen — 2003
• Large strain work hardening and texturesJ. Gil Sevillano, P. Van Houtte, Etienne Aernoudt — 1980
• Microstructural parameters and flow stress in Al–0.13% Mg deformed by ECAE processingJacob R. Bowen, P.B. Prangnell, Dorte Juul Jensen — 2004
• Effect of grain size on work hardening in nickelAnthony W. Thompson — 1977
• The plastic deformation of polycrystals I. Aluminium between room temperature and 400°CJ. T. Al-Haidary, N. J. Petch, E. R. de los Rios — 1983
• The Effect of Grain Size and Strain on the Tensile Flow Stress of Aluminium at Room TemperatureN. Hansen — 1977
• Microstructure and strength of nickel at large strainsD.A. Hughes, N. Hansen — 2000
• Deformation structures developing on fine scalesD.A. Hughes, N. Hansen — 2003
• New discoveries in deformed metalsNiels Hansen, Robert F. Mehl, Award Medalist — 2001
• The plastic deformation of polycrystalline aggregatesRonald W. Armstrong, I. Codd, R. M. Douthwaite — 1962
• Nanocrystalline electrodeposited Ni: microstructure and tensile propertiesF. Dalla Torre, H. Van Swygenhoven, M. Victoria — 2002
• The Hall–Petch Relation and High-Temperature SubgrainsD. J. Abson, J. J. Jonas — 1970
• Mechanical properties of nanocrystalline nickel produced by electrodepositionFereshteh Ebrahimi, Gerald R. Bourne, Matt Kelly — 1999
• Instabilities and ductility of nanocrystalline and ultrafine-grained metalsE. Ma — 2003
• Equal-channel angular pressing of commercial aluminum alloys: Grain refinement, thermal stability and tensile propertiesZenji Horita, Takayoshi Fujinami, Minoru Nemoto — 2000
• Quench rate effects in Al-Zn-Mg-Cu alloysD. S. Thompson, B. S. Subramanya, S. A. Levy — 1971

Cited by

• Wear behavior of spark plasma sintered nanostructured modified 9Cr-1Mo steelAditya Dekhane — 2013
• Effect of oxide particles on the stabilization and final microstructure in aluminium晃明 岩野, 佳秀 菅野, 尚 丸目 — 2011
• Thermo-Mechanical Modeling of the Electrically-Assisted Manufacturing (EAM) Technique During Open Die ForgingWesley A. Salandro — 2012
• Fiabilité mécanique des assemblages électroniques utilisant des alliages du type SnAgCuB. Dompierre — 2011
• On the Development of High Strain Rate Experiments for the Characterization of Engineering MaterialsSilas Mallon — 2014
• Dynamic Ferrite Transformation in Fe-6Ni-0.1C AlloyNokeun Park — 2013
• Modeling metallic single crystal plastic hardening through the evolution of dislocation subgrain structuresBenjamin L Hansen — 2009
• Modificación microestructural y optimización de las propiedades mecánicas de una aleación de Cu-Cr-Zr procesada por ECAP a distintas temperaturasKesman Valdés León — 2013
• Densification de matériaux pulvérulents par un procédé innovant de frittage flash DCRS (Dynamic Compaction Resistance Sintering)Philippe Acquier — 2014
• On the effect of microstructure on the torsional response of AA7050-T7651 at elevated strain ratesSilas Mallon, Behrad Koohbor, Addis Kidane — 2015
• Modification of the Hall–Petch equation for friction-stir-processing microstructures of high-nitrogen steelDongxu Du, Ruidong Fu, Yijun Li — 2015
• Stabilized plasticity in ultrahigh strength, submicron Al crystalsTao Hu, Lin Jiang, Hanry Yang — 2015
• Effects of annealing on microstructure and mechanical properties of nano-grained Ni-based alloy produced by severe cold rollingYanle Sun, Songqian Xu, Aidang Shan — 2015
• Effects of nanometric inclusions on the microstructural characteristics and strengthening of a friction-stir processed aluminum–magnesium alloyF. Khodabakhshi, Abdolreza Simchi, Alireza Kokabi — 2015
• Microstructural and mechanical analysis on Cu-Sn intermetallic micro-joints under isothermal conditionLiling Mo, Zhiwen Chen, Feifeng Wu — 2015
• Potencjalne możliwości i ograniczenia konstrukcyjnych nanomateriałów metalicznychH. Dybiec — 2005
• Finite element simulation and experimental investigation on homogeneity of Mg-9.8Gd-2.7Y-0.4Zr magnesium alloy processed by repeated-upsettingHao Zhou, Q.D. Wang, Wei Guo — 2015
• Precipitation phenomena, thermal stability and grain growth kinetics in an ultra-fine grained Al 2014 alloy after annealing treatmentAbhijeet Dhal, S.K. Panigrahi, M.S. Shunmugam — 2015
• Effect of ageing on tensile behavior of ultrafine grained Al 6061 alloyP. Nageswara Rao, Dharmendra Singh, H.‐G. Brokmeier — 2015
• Study of Defects in Aluminium using Large Scale Electronic Structure Calculations.Balachandran Radhakrishnan — 2014

Related papers

• Thermodynamic stability and kinematic accessibility of curved grain boundaries in directionally solidified bicrystalsLogan G. Ware, Daniel Suzuki, Zachary C. Cordero — 2020
• Transition between low and high angle grain boundariesMyrjam Winning, Anthony D. Rollett — 2005
• Grain Boundary Mechanics – Influence of Mechanical Stress Fields on Grain BoundariesMyrjam Winning — 2004
• Fold Formation near Grain Boundaries in an Age-Hardened Aluminum Alloy Deformed at Room TemperatureYasuhiro Uetani, Hideki Murase, Kenji Matsuda — 1994
• Effect of serrated grain boundary on stress corrosion cracking of Alloy 600H.P. Kim, Min‐Jae Choi, S.W. Kim — 2018
• Grain boundary wetting-related phase transformations in Al and Cu-based alloys. ReviewBoris B. Straumal, Olga A. Kogtenkova, A. B. Straumal — 2018
• Grain Boundaries: From Theory to EngineeringL. Priester — 2012
• Aluminum Σ3 grain boundary sliding enhanced by vacancy diffusionNingning Du, Yue Qi, Paul E. Krajewski — 2010
• Energy-Minimizing Structures For Low-Angle Grain Boundaries in ZincFu-Rong Che, Alexander H. King — 1985