Effect of Hot Rolling on the Structure of TC21 Alloy with Acicular Alpha
Explore this paper's citation graph
- Type
- article
- Published
- 2012-01-31
- Cited by
- 15
- References
- 26
- OpenAlex
- https://openalex.org/W2013837896
- Semantic Scholar
- https://api.semanticscholar.org/CorpusID:137397575
Keywords
Equiaxed crystals, Acicular, Materials science, Alloy, Recrystallization (geology)
References
- Nanostructured materials by high-pressure severe plastic deformation
- Relationship among forging technology, structure and properties of TC21 alloy bars
- Kinetics of dehydrogenation in Ti600, TC21 and Ti40 alloys
- Large-strain torsional deformation in aluminum at elevated temperatures
- Effect of hydrogen content on superplastic forming/diffusion bonding of TC21 alloys
- INSTABILITY MECHANISMS IN LAMELLAR MICROSTRUCTURES
- Production of submicrocrystalline structure in large-scale Ti–6Al–4V billet by warm severe deformation processing
- Effect of the lamellar grain size on plastic flow behavior and microstructure evolution during hot working of a gamma titanium aluminide alloy
- Effect of hydrostatic extrusion at 600–700 °C on the structure and properties of Ti–6Al–4V alloy
- Modification of alpha morphology in Ti-6Al-4V by thermomechanical processing
- Mechanisms of globularization of Ti-6Al-4V during static heat treatment
- Prediction of the kinetics of static globularization of Ti-6Al-4V
- Microstructure evolution during warm working of Ti–6Al–4V with a colony-α microstructure
- Grain refinement and properties of pure Ti processed by warm ECAP and cold rolling
- New developments in geometric dynamic recrystallization
- Flow behavior and globularization kinetics during hot working of Ti–6Al–4V with a colony alpha microstructure
- Temperature Effects of ECAP and Annealing after ECAP on Microstructure of TA15 Alloy
- Grain-structure refinement in titanium alloy under different loading schedules
- Deformation twins in pure titanium processed by equal channel angular pressing
- Wettability and spreading kinetics of molten aluminum on copper-coated ceramics
Cited by
- Superplastic Forming of a Three-Stage Hemispherical 5083 Aluminium Profile
- Effect of β heat treatment on phase transformations of TC21 during rolling
- In-situ SEM observations of tensile deformation of the lamellar microstructure in TC21 titanium alloy
- Mechanism of Reduction in Grain and Particle Sizes of Nix-Fe100x Nanopowder by Mechanical Alloying
- Effect of Processing Parameters on Edge Cracking in Cold Rolling
- Influence of Cooling Rate and Aging on the Lamellar Microstructure and Fractography of TC21 Titanium Alloy
- An Investigation on the Effect of Design Parameters of Side Guide on Camber in Hot Slab Rolling
- Effect of Variants of Thermomechanical Working and Annealing Treatment on Titanium Alloy Ti6Al4V Closed Die Forgings
- Review on globularization of titanium alloy with lamellar colony
- Microstructure evolution and mechanical properties of a hot-rolled Ti alloy
- Thermomechanical treatment-induced microstructure refinement to optimize mechanical properties of TC21 titanium alloys
- Pressure Prediction by Programme Logic Control Approach on Superplastic Forming in 7075 Al Alloy
- Microstructure, texture evolution and mechanical behavior of Ti-3.5Al-5Mo-4V titanium alloy during hot rolling in a β field
- Achieving fine grain microstructure and high performance of Ti-6Al-4V plates through directly high temperature β rolling
- Influence of texture on the superelasticity and elastic modulus of Ti-20Nb-10Zr alloy
Related papers
- Achieving super-high strength and acceptable plasticity for a near β-type Ti-4.5Mo-5.1Al-1.8Zr-1.1Sn-2.5Cr-2.9Zn alloy through manipulating hierarchical microstructure
- Heat Treatment and Mechanical Properties of Ti-Fe Alloys
- Formation of equiaxed grains in selective laser melted pure titanium during annealing
- Hot-Working Characteristics and Dynamic Recrystallization Behavior of Hot Isostatically Pressed FGH4096 Superalloy
- Additive manufacturing of Ti-6Al-4V alloy by micro-laser metal wire deposition with pulsed wave emission: processability and microstructure formation
- Microstructure, Tensile, and Creep Behaviors of Ti-22Al-25Nb (at.%) Orthorhombic Alloy with Equiaxed Microstructure
- Hot deformation behavior and new grain size model of hot extruded FGH4096 superalloy during hot compression