Shear behaviour of adhesive layers

Keywords

Materials science, Adhesive, Composite material, Traction (geology), Shear (geology)

References

• An experimental method to determine the complete stress-deformation relatioin for a structural adhesive layer loaded in shearSvante Alfredsson, Anders Biel, K. Leffler — 2003
• On the Analysis and Design of the End Notched Flexure (ENF) Specimen for Mode II TestingLeif A. Carlsson, John W. Gillespie, R. Byron Pipes — 1986
• Derivation of a model of adhesively bonded joints by the asymptotic expansion methodAnders Klarbring — 1991
• The stress–elongation relation for an adhesive layer loaded in peel using equilibrium of energetic forcesTobias Andersson, Ulf Stigh — 2004
• Modeling and parameter calibration of an adhesive layer at the meso levelKent Salomonsson, Tobias Andersson — 2008
• Cohesive zone modelling of damage at the tip of cracks in slender beam structuresSören Östlund, Fred Nilsson — 1993
• On the determination of the constitutive properties of thin interphase layers — An exact inverse solutionPeter Olsson, Ulf Stigh — 1989
• Cohesive law and notch sensitivity of adhesive jointsBent F. Sørensen — 2002
• The force on an elastic singularityJ. D. Eshelby — 1951
• Damage and crack growth analysis of the double cantilever beam specimenUlf Stigh — 1988
• On the effective constitutive properties of a thin adhesive layer loaded in peelTobias Andersson, Anders Biel — 2006
• A path-independent integral and the approximate analysis of strainJ. R. Rice — 1968
• Structural Adhesive Joints in EngineeringRobert Adams, W. C. Wake — 1984
• Elastic–plastic mode-II fracture of adhesive jointsQing‐Xiong Yang, M.D. Thouless, S. M. Ward — 2001
• The Effect of Damage Nucleation on the Toughness of an Adhesive JointMatthew Cavalli, M.D. Thouless — 2001
• On the instantaneous energy release rate of the end-notch flexure adhesive joint specimenK.S. Alfredsson — 2004
• Determination of cohesive laws by the J integral approachBent F. Sørensen, Torben Jacobsen — 2003

Cited by

• Einfache Parameter-identifikation und ModellierungPierre Jousset — 2012
• Cohesive laws for adhesives at repeated loading : an experimental methodAnders Biel — 2009
• Cohesive modelling of the temperature dependence of epoxy based adhesives in Mode I and Mode II loadingTomas Walander — 2013
• Progressive Damage Analysis of Bonded Composite JointsFrank A. Leone, Donato Girolamo, Carlos G. Dávila — 2012
• Constitutive behaviour and fracture toughness of an adhesive layerAnders Biel — 2005
• Adhesive Characterization and Progressive Damage Analysis of Bonded Composite JointsDonato Girolamo, Carlos G. Dávila, Frank A. Leone — 2014
• Application of cohesive modeling in joining technology : Thick adhesive layers and rivet jointsSaeed Salimi — 2012
• Experimental methods to determine model parameters for failure modes of CFRPDaniel Svensson — 2013
• An experimental data reduction method for the Mixed Mode Bending test based on the J-integral approachC. Sarrado, A. Turón, J. Renart — 2015
• Aplicação de métodos numéricos avançados para a previsão de resistência de ligações adesivasTiago A.B. Fernandes — 2014
• Simulation of an adhesive layer using a novel mixed mode cohesive lawJia Li Högberg, Kent Salomonsson — 2006
• On Cohesive Modelling of Carbon/Epoxy Composites - Delamination and Fibre Compressive FailureDaniel Svensson — 2015
• Numerical Evaluation of the Direct Method for Cohesive Law Extraction in Shear by the End-Notched Flexure Test☆R.L. Fernandes, R.D.S.G. Campilho, A.C.C. Leitão — 2015
• Shear testing of thick adhesive layers using the ENF-specimenK.S. Alfredsson, Anders Biel, Saeed Salimi — 2015
• Rate dependent behavior of crash-optimized adhesives – Experimental characterization, model development, and simulationMichael May, Olaf Hesebeck, Stephan Marzi — 2015
• Fracture Prediction of Adhesively Bonded Structures Using Energy Release RatesQuantian Luo, Liyong Tong — 2009
• Characterization of composite bonded joints under pure mode II fatigue loadingMaria Victoria Castro Fernández, M.F.S.F. de Moura, Lucas F. M. da Silva — 2013
• Determination of cohesive laws in wood bonded joints under mode II loading using the ENF testF.G.A. Silva, J.J.L. Morais, Nuno Dourado — 2014
• Numerical Prediction of the Response of Metal-to-Metal Adhesive Joints with Ductile AdhesivesNicholas G. Tsouvalis, Konstantinos N. Anyfantis — 2010
• FE Simulation for Crash-Resistant AdhesivesPierre Jousset — 2012

Related papers

• Progress in the adhesive for PEWei Zhao — 2005
• Effect of Combined Environmental Factors on Adhesive Shear Strengths and Chemical Structures of AdhesivesYoung-Eun Hwang, Sungho Yoon — 2011
• Evaluation of factors on the adhesive properties of carbopol-HPMC adhesive tabletsPing Qi — 2002
• Research Progress of Room Temperature Cured Heat-resistant AdhesiveYing Huang — 2010
• ADHESIVES AS PART OF PCM BASED ON ORGANIC FILLERSN.Ph. Lukina, A. P. Petrova, A. Yu. Isaev — 2021
• Influence of UV on the self-adhesive properties of silicone pressure-sensitive adhesivesAdrian Krzysztof Antosik, Karolina Mozelewska, Konrad Gziut — 2023
• Dismantleable mechanism of dismantleable adhesive including thermally expansive microcapsuleYuichi Nishiyama, Chiaki Sato — 2003
• 복합적 환경인자의 영향에 의한 접착제의 접착전단강도 및 화학구조 변화황영은, Sung Ho Yoon — 2011
• Mussel adhesive protein as an environmentally-friendly harmless wood furniture adhesiveYoung Hoon Song, Jeong Hyun Seo, Yoo Seong Choi — 2016