Study of effect of Mn addition on the mechanical properties of Ti2AlC/TiAl composites through first principles study and experimental investigation

Keywords

Materials science, Brittleness, Ductility (Earth science), Composite material, Strain rate

References

• Effect of Titanium on Microstructure and Mechanical Properties of Cu50Zr50−xTix (2.5 ≤ x ≤ 7.5) Glass Matrix CompositesS. Pauly, J. Das, C. Duhamel — 2008
• Formation of TiAl–Ti2AlC in situ composites by combustion synthesisC.L. Yeh, Yung‐Shuen Shen — 2009
• Electronic effect on the ductility of alloyed TiAl compoundMasahiko Morinaga, Junichi Saito, Natsuo Yukawa — 1990
• Effects of aluminum content and microstructure on tensile properties of TiAl alloysTatsuo Kumagai, Morihiko Nakamura — 1996
• Simultaneously Increasing the Ductility and Strength of Nanostructured AlloysYonghao Zhao, Xiaozhou Liao, Sheng Cheng — 2006
• Microstructures and mechanical properties of TiB2 particle reinforced TiAl composites by plasma arc melting processAkio Hirose, Mitsuo Hasegawa, Kojiro F. Kobayashi — 1997
• First-principles study of the generalized stacking fault energy in Mg–3Al–3Sn alloyHui‐Yuan Wang, Nan Zhang, Cheng Wang — 2011
• The effects of Cr additions to binary TiAl-base alloysShyh‐Chin Huang, Ernest L. Hall — 1991
• Theoretical calculations and experimental measurements of the structure of Ti5Si3 with interstitial additionsJason Williams, Y.Y. Ye, M. J. Kramer — 2000
• Work hardening of ultrafine-grained copper with nanoscale twinsXueying Chen, Lei Lu — 2007
• Reactive sintering of TiAl–Ti5Si3 in situ compositesDavid E. Alman — 2005
• Microstructure and deformation of two-phase γ-titanium aluminidesF. Appel, Richard Wagner — 1998
• Strain hardening behavior of a friction stir welded magnesium alloyN. Afrin, D.L. Chen, X. Cao — 2007
• Synthesis of Ti2AlC by spark plasma sintering of TiAl–carbon nanotube powder mixtureS. R. Kulkarni, Amit V. Datye Kuang-His Wu — 2010
• Consolidation of a gamma TiAl–Mn–Mo alloy by elemental powder metallurgyT.K Lee, Е. И. Мосунов, S. K. Hwang — 1997
• First-principles study of L10 Ti-Al and V-Al alloys.S. R. Chubb, D. A. Papaconstantopoulos, B. M. Klein — 1988
• "Special points for Brillouin-zone integrations"—a replyJ.D. Pack, Hendrik J. Monkhorst — 1977
• Formation of TiAl–Ti5Si3 and TiAl–Al2O3 in situ composites by combustion synthesisC.L. Yeh, R.F. Li — 2008
• Effect of ternary additions on mechanical properties of TiAlTakeshi Kawabata, Hideaki Fukai, Osamu Izumi — 1998
• Soft self-consistent pseudopotentials in a generalized eigenvalue formalism.David Vanderbilt — 1990

Cited by

• Microstructure and mechanical properties of Ti2AlC-reinforced TiAl compositesTaotao Ai, Fang Liu, Qi Yu — 2014
• Effect of MoO3 on microstructure and mechanical properties of (Ti,Mo)Al/Al2O3 composites by in situ reactive hot pressingFen Wang, Yuanbo Zhao, Chenhui Yang — 2016
• The Microstructures and Mechanical Properties of V2O5-Doped Al2O3/TiAl In-Situ Composites by Reactive Hot Pressing ProcessKun Zhang, Fen Wang, Jianfeng Zhu — 2013
• The microstructure and tensile properties of the Ti2AlC reinforced TiAl composites fabricated by powder metallurgyHongfei Sun, Xuewen Li, Peng Zhang — 2014
• Microstructural and mechanical properties of dual Ti3AlC2–Ti2AlC reinforced TiAl composites fabricated by reaction hot pressingTaotao Ai, Fen Wang, Xiaoming Feng — 2014
• Effect of strain rate on the compression behavior of TiAl and TiAl–2Mn alloys fabricated by combustion synthesis and hot press consolidationShi–Li Shu, Feng Qiu, Bin Xing — 2013
• Ti2AlC/TiAl Matrix Intermetallic Compound Prepared by In Situ Hot PressingTao Ai, Fen Wang, Chenhui Yang — 2014
• Effect of Mn content on the microstructure and mechanical properties of (Ti,Mn)Al/Al_2O3 in situ composites prepared by hot pressingFen Wang, Kun Zhang, Jianfeng Zhu — 2013
• Fabrication and Characterization of Interpenetrating Metal/Ternary Carbide CompositesLiangfa Hu — 2015
• Microstructure and oxidation behaviour of TiAl(Nb)/Ti2AlC composites fabricated by mechanical alloying and hot pressingKarimi Hadi, Ali Ghasemi, Morteza Hadi — 2016
• Effect of carbon reactant on microstructures and mechanical properties of TiAl/Ti2AlC compositesXiaojie Song, Hongzhi Cui, Ye Han — 2017
• Influence of Mn addition on the microstructure and mechanical properties of a directionally solidified γ-TiAl alloyQiang Wang, Hongsheng Ding, Hailong Zhang — 2018
• Macro/microstructure evolution and mechanical properties of Ti33.3Al alloys by adding WC particlesRuirun Chen, Yingmei Tan, Hongze Fang — 2018
• Microstructure evolution and mechanical properties of TiAl binary alloys added with SiC fibersYingmei Tan, Ruirun Chen, Hongze Fang — 2018
• Role of graphite on microstructural evolution and mechanical properties of ternary TiAl alloy prepared by arc melting methodHongze Fang, Ruirun Chen, Yong Yang — 2018
• Room temperature mechanical behaviour of cast in-situ TiAl matrix composite reinforced with carbide particlesJ. Lapin, Michaela Štamborská, Kateryna Kamyshnykova — 2019
• Hot Deformation Behavior and Microstructural Evolution of a Novel β-Solidifying Ti–43Al–3Mn–2Nb–0.1Y AlloyQianqian Wu, Ning Cui, Xiaohong Xiao — 2019
• High temperature tensile properties and fracture behavior of Y2O3-bearing Ti-48Al-2Cr-2Nb alloyYingfei Guo, Shulong Xiao, Yuyong Chen — 2020
• Microstructure Evolution and Mechanical Properties of Spark Plasma Sintered Manganese Addition on Ti-48Al-2Cr-2Nb AlloysA. Raja Annamalai, M. Srikanth, Raunak Varshney — 2020
• Microstructure and compression behavior of in-situ synthesized Ti2AlC reinforced Ti-48Al-2Cr alloy with carbon nanotubes additionDongdong Zhu, Li Liu, Duo Dong — 2021

Related papers

• High strain-rate doformation characteristics in commercial aluminium alloys.Kenji Higashi, Toshiji Mukai, Kouichi Kaizu — 1990
• Ductile-brittle-ductile transition in an electrodeposited 13 nanometer grain sized Ni-8.6 wt.% Co alloyChangdong Gu, Jianshe Lian, Qing Jiang — 2007
• Strain Hardening and Strain-Rate Sensitivity of an Extruded Magnesium AlloyXia Lin, D.L. Chen — 2008
• Strain rate sensitivity and evolution of dislocations and twins in a twinning-induced plasticity steelZhiyuan Liang, X. Wang, Weidong Huang — 2015
• Strain-rate effect on work-hardening behavior in β-type Ti-10Mo-1Fe alloy with TWIP effectXin Ji, Satoshi Emura, Xiaohua Min — 2017
• Effect of Strain Rate on Mechanical Properties of Fe-23Mn-2Al-0.2C TWIP SteelXiaomei Qin, Liqing Chen — 2011
• The strain-rate dependence of flow stress and work-hardening rate in three Al-Mg alloysXuexing Yao, Stanisław Zając — 2000
• Strain hardening behavior, strain rate sensitivity and hot deformation maps of AISI 321 austenitic stainless steelMehdi Shaban Ghazani, B. Eghbali — 2021
• Rate-dependent hardening model for polymer-bonded explosives with an HTPB polymer matrix considering a wide range of strain ratesChunghee Park, Hoon Huh, Jung Su Park — 2015