Interactions of fluorinated catalyst and polutetrafluoroethylene in two different plain zinc dialkyldithiophosphate oils and one fully formulated oil using design of experiment
Explore this paper's citation graph
- Type
- article
- Published
- 2011-06-01
- Cited by
- 25
- References
- 43
- OpenAlex
- https://openalex.org/W1493176219
- Semantic Scholar
- https://api.semanticscholar.org/CorpusID:94183105
Keywords
Catalysis, Materials science, Zinc, Phosphorus, Lubrication
References
- Antiwear mechanism of zinc dialkyl dithiophosphates added to a paraffinic oil in the boundary lubrication condition
- The Thermal Degradation and EP Performance of Zinc Dialkyldithiophosphate Additives in White Oil
- Limitations on use of ZDDP as an antiwear additive in boundary lubrication
- Mechanism of formation of antiwear films from zinc dialkyldithiophosphates
- The nature and origin of wear particles from boundary lubrication with a zinc dialkyl dithiophosphate
- Chemical characterization of antiwear films generated on steel by zinc dialkyl dithiophosphate using X-ray absorption spectroscopy
- X-ray absorption study of antiwear films generated from ZDDP and borate micelles
- The Chemistry of the Thermal Degradation of Zinc Dialkyldithiophosphate Additives
- Additive–additive interaction: an XPS study of the effect of ZDDP on the AW/EP characteristics of molybdenum based additives
- The antiwear mechanism of zddp's. Part II
- The two-layer structure of Zndtp tribofilms: Part I: AES, XPS and XANES analyses
- Transfer films and friction under boundary lubrication
- Chemical structure characterization of the boundary lubrication film using X-ray photoelectron spectroscopy and scanning Auger microprobe techniques
- A comparison of boundary wear film formation on steel and a thermal sprayed Co/Cr/Mo coating under sliding conditions
- Properties of tribofilms formed with ashless dithiophosphate and zinc dialkyl dithiophosphate under extreme pressure conditions
- Synthesis of Fluorinated ZDDP Compounds
- The History and Mechanisms of ZDDP
- Effect of contact load and lubricant volume on the properties of tribofilms formed under boundary lubrication in a fully formulated oil under extreme load conditions
- Third-bodies in tribology
- Solution decomposition of zinc dialkyl dithiophosphate and its effect on antiwear and thermal film formation studied by X-ray absorption spectroscopy
Cited by
- Friction and wear reductions under slip-rolling contact through chemically reactive tribofilm generation during pre-conditioning of steel alloys
- Modeling and analysis of the effects of nano-oil additives on wear properties of AISI 4140 steel material using mixture design
- Role of TiF3 catalyst in the tribological properties of biofuel soot-contaminated liquid paraffin
- The importance of 2 per cent PTFE/FeF3 additives in engine fully formulated oil for reducing friction and wear under boundary lubrication condition
- Effect of TiF3 catalyst on the tribological properties of carbon black-contaminated engine oils
- Synthesis of Poly(glycerol-succinic acid)-dithiocarbamate and Poly(glycerol-succinic acid)-1,3,4-thiadiazole Dendrimers and Their Use as Anti-Wear Oil Additives
- Optimization of Extreme Load and Break-in Period in Plain ZDDP Oil with FeF3 Catalyst Using Design of Experiment and Fundamental Study under Different Speeds
- The Importance of Variable Speeds under Extreme Pressure Loading in Molybdenum Disulfide Greases Using Four-Ball Wear Tests
- Tribological and thermal characteristics of reduced phosphorus plain ZDDP oil in the presence of PTFE/FeF3/TiF3 under optimized extreme loading condition and a break in period using two different rotational speeds
- Multiresponse Optimization of a Hydraulic Oil Formulation by Mixture Design and Response Surface Methods
- Towards the Minimization of Friction and Wear Using Fluorinated Additives under Extreme Boundary Lubrication in Fully Formulated Oil
- The Effect of Cyclic Speed on the Wear Properties of Molybdenum Disulfide Greases under Extreme Pressure Loading Using 4 Balls Wear Tests
- The Impact of Surface Roughness and PTFE/TiF3/FeF3 Additives in Plain ZDDP Oil on the Friction and Wear Behavior Using Thermal and Tribological Analysis under Extreme Pressure Condition
- Friction and wear reductions in fluorinated plain and fully formulated oils through enhanced heating time using moderate loading under boundary lubrication conditions
- Friction and wear reductions in slip-rolling steel contacts through pre-conditioned chemical tribofilms from bismuth compounds
- Phosphorus Reduction in Plain and Fully Formulated Oils Using Fluorinated Additives
- Tribofilm formation and characterization of lubricating oils with biofuel soot and inorganic fluorides
- Pressure Relief in Prosthetic Sockets through Hole Implementation Using Different Materials
- Tribological behavior and wear prediction of molybdenum disulfide grease lubricated rolling bearings under variable loads and speeds via experimental and statistical approach
- Plasma-Functionalized Polytetrafluoroethylene Nanoparticles for Improved Wear in Lubricated Contact.
Related papers
- Recent Patents on Rolling Bearing Lubrication Device
- Oil-Gas Lubrication Technology in the Application of Feasibility Test of Sliding Bearing
- Local absorption of zinc from wounds treated with different concentrations of zinc sulphate.
- Zinc gluconate and zinc sulphate as dietary zinc sources for Atlantic salmon
- Alternative lubrication methods for large open gear drives
- Contribution of zinc fraction to available zinc extracted, by some chemical methods, from rice growing soils of North-Western Himalayas
- Effect of zinc status on salivary zinc concentrations in the rat.
- Effect of time of application on the effectiveness of zinc sulphate and zinc oxide as sources of zinc for wheat
- The Secondary Lubrication Effect under Fluid Lubrication